top of page

Banned Chinese Equipment at Defense Suppliers: What Section 889 and Related Rules Require | Jay Wiessner

Writer: My ISO Jay
My ISO Jay
1 day ago
10 min read

Banned Chinese Equipment at Defense Suppliers: What Section 889 and Related Rules Require


Walk through almost any manufacturing facility and you will find equipment made by companies the U.S. government has restricted: Hikvision or Dahua security cameras, Huawei or ZTE network gear, Hytera two-way radios, Kaspersky antivirus, or a DJI drone used for roof inspections. Much of it was installed years before the company took on ITAR or defense work. As suppliers register with the State Department, prepare for CMMC, or take on defense subcontracts, the same question keeps coming up: Are we allowed to keep this equipment?


The answer depends on which rule applies, where you sit in the supply chain, what you have certified, and what your customers require. This article walks through Section 889 of the FY2019 National Defense Authorization Act (implemented in FAR 52.204-25), the other federal bans that sit alongside it, and the most common real-world case: security cameras. It also explains why replacing covered equipment is usually the right call even when the law does not strictly require it. In this article we will review "Banned Chinese Equipment at Defense Suppliers".


What Section 889 says

Section 889 has two parts, and the difference between them drives almost every answer.


Part A: paragraph (b)(1)

Part B: paragraph (b)(2)

What it prohibits

Providing covered equipment or services to the government

The government contracting with any entity that uses covered equipment

Effective

August 13, 2019

August 13, 2020

Scope

What you deliver

Your entire operation, "regardless of whether that use is in performance of work under a Federal contract"

Flows to subcontractors

Yes

No (excluded by paragraph (e))

Covered equipment under Section 889 comes from five named companies, including their subsidiaries and affiliates:

Manufacturer

Covered products

Where it shows up in a typical facility

Purpose qualifier?

Huawei

Telecommunications equipment

Routers, switches, Wi-Fi access points, cellular hotspots, phones, modems

No, covered for any use

ZTE

Telecommunications equipment

Routers, modems, cellular hotspots, phones

No, covered for any use

Hikvision

Video surveillance and telecommunications equipment

IP cameras, NVRs, DVRs, access control, intercoms

Yes

Dahua

Video surveillance and telecommunications equipment

IP cameras, NVRs, DVRs, thermal cameras

Yes

Hytera

Video surveillance and telecommunications equipment

Two-way radios, body cameras, dispatch systems

Yes

The clause also covers services provided by these companies or using their equipment, and equipment from any entity the Secretary of Defense determines is owned or controlled by, or connected to, the government of China.


There is one important qualifier for the last three companies. Hikvision, Dahua, and Hytera equipment is covered when used "for the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes." A camera in a retail lobby is arguably outside that language. A camera providing physical security at a facility that stores defense articles or technical data is very hard to argue out of it, especially since the clause itself lists ITAR items as "critical technology."


The exceptions do not help either. Paragraph (c)(2) exempts only equipment that "cannot route or redirect user data traffic or permit visibility into any user data." IP cameras and network video recorders do exactly that.


One practical warning: "subsidiary or affiliate" reaches white-labeled products. Many budget camera brands sold online and through integrators are Hikvision or Dahua hardware under another name. Check the firmware, the NVR software, and the vendor's Section 889 certification, not just the logo.


Prime contractors vs. subcontractors

The Part B "use" prohibition applies to prime contractors, not subcontractors. Paragraph (e) of FAR 52.204-25 says the clause must be flowed down "including this paragraph (e) and excluding paragraph (b)(2)." Many large primes go a step further and explicitly delete (b)(2) in their own supplier flowdowns.


That means a typical subcontractor is legally bound only by Part A: do not deliver covered equipment through the prime. Fastener, machining, and other component suppliers rarely have any Part A exposure.


This is where many suppliers stop reading, and it is a mistake. A subcontractor can still be caught in several ways:

  1. SAM registration. Any company registered in SAM.gov answers the FAR 52.204-26 representation, which asks whether the entity uses covered equipment. That representation is not tied to a specific contract.

  2. Direct government contracts. If the registered entity holds any prime contract with the federal government, even on unrelated work, Part B applies to the whole entity.

  3. Customer requirements beyond the FAR. A prime can contractually require more than the FAR does. Some purchase order terms, quality clauses, and supplier surveys ask suppliers to certify that they do not use covered equipment. Breaching that requirement is a contract issue, not a Section 889 issue, but it still carries consequences.

  4. Future rule changes. The FAR Council has said it may consider extending Part B further. Check for updates periodically.


Beyond Section 889: other banned equipment and manufacturers

Section 889 is the best known restriction, but it is not the only one. Several other rules target specific companies or whole product categories, and some of them do flow down to subcontractors.

Rule

What's restricted

Applies to

Flows to subcontractors?

Status

FAR 52.204-23 (FY2018 NDAA Sec. 1634)

Kaspersky Lab hardware, software, and services

Providing or using them in contract performance

Yes

In effect; Commerce also bars Kaspersky sales in the U.S.

Covered defense telecommunications equipment or services (Huawei, ZTE, Hikvision, Dahua, Hytera, and others)

DoD contracts

Yes

In effect

FAR 52.240-1 (American Security Drone Act)

Drones from covered foreign entities on the FASC list in SAM.gov

Delivering, operating in contract performance, or buying with federal funds

Yes

Operation and funding bans in effect since December 22, 2025

FAR 52.204-30 (FASCSA orders)

Products named in exclusion or removal orders, starting with Acronis software for the Intelligence Community in September 2025

Contracts covered by an order

Yes

Check SAM.gov for active orders

The Section 889 companies, Kaspersky, Chinese carriers, DJI and Autel, plus new foreign-made drones, consumer routers, power inverters, and certain robots

New FCC equipment authorizations

Not a contract clause

Expanded through 2025 and 2026; previously authorized devices can still be used

FY2023 NDAA Sec. 5949

Semiconductors from SMIC, CXMT, and YMTC

Federal purchases of products containing them

Yes, as proposed

Proposed rule; effective December 23, 2027

FY2024 NDAA Sec. 154

Batteries from CATL, BYD, Envision, EVE, Gotion, and Hithium

DoD battery procurement

Expected

Effective October 2027

Two takeaways for suppliers. First, unlike Section 889 Part B, the Kaspersky, drone, and FASCSA clauses flow down, so a subcontractor using a DJI drone or Kaspersky antivirus on contract work can be directly out of compliance. Second, the list keeps growing. A company that inventories its equipment once and stops checking will fall behind.


Three common myths:


Myth 1: "We had the cameras first, so we're grandfathered." There is no grandfather clause. Part B is about current use, not purchase date. Cameras installed before the August 2020 effective date, or before a company began ITAR work, are covered as long as they are in use. The temporary agency waivers for Part B expired in August 2022, and the remaining national security waiver route is not a practical option for a typical contractor. (Some newer rules, such as the proposed semiconductor ban, do protect equipment acquired before their effective date, which is one more reason to read each rule on its own terms.)


Myth 2: "Our cameras and equipment aren't on the internet, so they don't count." Air-gapping does not create an exception. The prohibition turns on who made the equipment and what it is used for, not how it is connected. The (c)(2) exception is about what a device is capable of, and a camera sending video to an onsite recorder is still routing user data. Isolation is good security practice and useful information for a mitigation report, but it does not make the cameras compliant.


Myth 3: "ITAR registration triggers Section 889." It does not. Section 889 is triggered by federal contracting and certifications. ITAR matters because it makes the "national security purposes" qualifier very hard to avoid once Section 889 applies.


What's at stake: there is no per-camera fine

Section 889 does not fine a company for owning covered cameras. It makes the company ineligible for federal contracts. The financial risk comes from continuing to contract while out of compliance, especially after certifying otherwise.

  • Loss of eligibility. The government cannot award, extend, or renew a contract with an entity covered by Part B. Existing contracts can be terminated for default if a representation proves inaccurate.

  • False Claims Act exposure. An inaccurate certification in SAM, in an offer, or to a customer can turn each invoice into a separate false claim. Current civil penalties run $14,308 to $28,619 per claim (adjusted annually for inflation), plus up to three times the government's damages. Employees and competitors can bring whistleblower suits and keep 15 to 30 percent of the recovery.

  • Suspension or debarment. Exclusion from all federal contracting, often for three years. For a defense supplier, this is usually the most serious outcome.

  • Criminal exposure. A knowingly false certification can be prosecuted as a false statement under 18 U.S.C. 1001. This is rare, but possible.


Because each invoice submitted under an inaccurate certification can be treated as a separate false claim, the exposure compounds quickly for suppliers with steady order volume:

Invoices per month

Claims per year

Annual civil penalty range (before damages)

1

12

$171,696 to $343,428

4

48

$686,784 to $1,373,712

10

120

$1,716,960 to $3,434,280

If covered equipment is found during contract performance, the clause requires a report within one business day and a mitigation follow-up within 10 business days. Prompt reporting and replacement is what keeps the situation a fixable compliance issue rather than a False Claims Act case.


Why covered cameras aren't simply banned at ITAR facilities

It surprises many people that no single rule says an ITAR facility cannot have Hikvision cameras. The gap exists because each regulation was built for a different purpose:

Regulation

What it controls

Effect on existing cameras

ITAR

Who can access defense articles and technical data (foreign persons and destinations)

None directly, unless the cameras enable unauthorized access to controlled data

Section 889

What the government buys and who it contracts with directly

Bars primes that use them; subcontractors mostly through certifications and customer terms

DFARS 252.204-7012, NIST SP 800-171, CMMC

How contractors protect Controlled Unclassified Information

Risk-based; no banned-brand list, but assessors will question them

FCC Covered List

Authorization of new devices for sale in the U.S.

New models cannot be authorized; installed cameras, routers, and drones remain legal to own and use

The concern with these manufacturers is not only their vulnerabilities, since plenty of Western brands have serious ones too. It is the companies' ties to the PRC government and Chinese laws that can compel cooperation with state intelligence. A vulnerability can be patched. Control of the firmware and update channel cannot.


Why we recommend replacing covered equipment anyway

Even when Section 889 does not legally apply, we advise suppliers to replace covered cameras, network equipment, radios, software, and drones, or at minimum remove them from ITAR and CUI areas and systems, before controlled work begins.

  • CMMC assessments. Defense work involving Controlled Unclassified Information leads toward CMMC Level 2. Chinese-manufactured cameras monitoring controlled areas are likely to draw scrutiny under the physical protection requirements, and they are an easy finding to avoid.

  • Technology Control Plans. An ITAR TCP must show that controlled technical data is protected. Networked cameras from a PRC-linked manufacturer pointed at controlled work areas or drawings undercut that plan.

  • Customer expectations. Primes increasingly ask about covered equipment in supplier surveys and audits, regardless of what the FAR requires of subcontractors.

  • Timing and cost. Replacing cameras, a router, or an antivirus license usually costs a few thousand dollars and is easiest before controlled production starts and before any program-specific certifications are made. Most major U.S., European, Japanese, and Korean manufacturers now offer NDAA-compliant product lines.


A practical checklist for suppliers:

  • Inventory covered equipment across the facility. Check cameras and recorders, routers, switches, Wi-Fi, cellular hotspots, phones, two-way radios, security software, and drones. Identify the actual manufacturer, including white-labeled Hikvision or Dahua hardware sold under other brand names.

  • Confirm your contracting position. Determine whether your company, or any entity in your corporate family, holds prime contracts with the federal government.

  • Check your SAM.gov representation. If you are registered, review your current FAR 52.204-26 response for accuracy.

  • Check the clauses that flow down. Look for FAR 52.204-23 (Kaspersky), 52.240-1 (drones), 52.204-30 (FASCSA orders), and DFARS 252.204-7018 in your subcontracts, and confirm nothing you use in contract performance falls under them.

  • Review every customer flowdown. Check purchase order terms, quality clauses, and supplier agreements from all customers, not just your largest one, to confirm none require you to certify that you do not use covered equipment.

  • Review past supplier surveys. Correct any Section 889 questionnaire responses that stated you do not use covered equipment if that was not accurate.

  • Isolate in the interim. Remove internet connectivity and remote access while replacement is planned, and document it.

  • Replace before controlled work begins. Prioritize equipment covering or connected to ITAR and CUI areas, and update your Technology Control Plan to reflect the change.

  • Recheck periodically. The FCC Covered List, the FASC list in SAM.gov, and upcoming semiconductor and battery rules continue to change.


The bottom line

For most subcontractors, Section 889 does not legally prohibit using Hikvision or Dahua cameras, or other covered telecommunications equipment. Other bans on Kaspersky software, certain drones, and FASCSA-listed products do flow down, and certifications, customer requirements, and CMMC expectations can turn any covered equipment into a real liability. The cost of replacement is small compared to the risk to a supplier's defense business, and the best time to act is before controlled work begins.


My ISO Consultants helps aerospace, defense, and manufacturing organizations prepare for AS9100, ISO 27001, and CMMC requirements through outsourced internal audits and onsite training. If you have questions about how these requirements apply to your facility, contact our team.


This article is for general information only and is not legal advice. My ISO Consultants is not a law firm. Consult your contracts or legal counsel about your organization's specific obligations and certifications.


Sources


China Banned
Chinese Equipment Ban

Author: Jay Wiessner

Ready to Take the Next Step?

Whether you're preparing for certification, improving your management system, or need professional auditing support, My ISO Consultants is here to help.​​​​​​

(844) MYISOPRO

PO Box 4372

Crestline, CA 92325

We service the entire United States and most countries, but we consider the following areas of California, Arizona, Texas and Nevada "Local" to us: San Bernardino County, Riverside County, Los Angeles County, Orange County, San Diego County, Ventura County, Sacramento County, San Jose, Santa Clara County, Fresno County, Phoenix Area, San Antonio, Austin, Reno and Las Vegas areas

© 2025 by My ISO Consultants

bottom of page